Toyota Techstream 14 00 18 Key

Table of Contents

Re: Toyota Techstream 12.00.127 + Activation key by cristi-obd2 on Mon Jul 02, 2018 2:24 am socrates1201 wrote: Java Runtime Missing message keeps popping every time I open the Techstream. Toyota Techstream V14.00.018 download free on mega. No need send ID to the dealer to give you the key). I lost my smart key FOB Turkey hunting (hole in my pocket). My dealer wanted $450 for a new smart key fob. I spent $29 for techstream SW and cable (actually, I already had the techstream) and $129 for an OEM fob. Aug 01, 2019 Techstream 2.0 techstream is the replacement for the Techstream 1.0 and Diagnostic Tester and can be used for all 1996–current Toyota/Scion/Lexus vehicles marketed in North America. Note: It is possible to permanently damage a vehicle controller during the flash reprogramming process. How to Install and Activate Toyota Techstream 14.20.019? Wednesday, August 7, 2019. AK91 plus key programmer. AUTOPHIX VAG007.

The latest Toyota Techstream v12.10.019 software is verified to work 100% with MINI VCIcable, Xhorse MVCI, VXDIAG VCX NANO for Toyota OEM diagnostics tool, Toyota OTC2 OEM diagnostics tool.

Techstream Lite allows Techstream diagnostic software to run on your PC (see minimum PC requirements) to service Toyota, Scion, and Lexus vehicles. Techstream Lite is an inexpensive alternative to the full TIS techstream system and provides factory level support for Toyota/Scion/Lexus vehicles.

Toyota Techstream V12.10.019 Overview

Free to use
NO need techstream activation/registration
Key 5000 Days all region patch included.
Support for new cars.

Toyota Techstream Hardware

Toyota customization–>MINI VCI
Toyota obdii diagnostics–> MINI VCI cable
Toyota techstream ecu programming—>VXDIAG VCX NANO for Toyota
Toyota techstream key programming—>VXDIAG VCX NANO Toyota

Toyota Techstream Installation and Setup

Toyota Techstream 14 00 18 Key Download

Read more Guide PDF.

Scantool Diagnostics

Techstream Lite supports DLC3/J1962 based diagnostic functions on 1996 and later Toyota, Scion, and Lexus vehicles marketed in North America.

Vehicle Reprogramming

Toyota, Scion, and Lexus ECUs can be reprogrammed using Techstream Lite. Available ECU updates are specified in applicable Technical Service Bulletins (TSBs), which can be accessed with a subscription to this website. You must have an active professional level subscription to access the calibration files.

Model Year Coverage

1996 up DLC/J1962 equipped vehicles

PC Requirements:

Toyota Techstream Key

Laptop or desktop computer
Intel or AMD processor: 1.5 GHz or higher
Windows 7 32 or 64 bit Techstream v4.21 up
Windows 8 32 or 64 bit Techstream v8.0 up
Keyboard & mouse
Memory (RAM): 1GB or higher
Hard Drive Space: 2 GB or more
Floppy Drive: not required
USB: 1.1 or higher
Network Card: 10/100/1000 Mbps Ethernet
Optical Drive: Not required
Video Resolution: 1024×768 recommended, 1024×600 minimum
Sound Card: 1 channel audio or higher
Internal or external audio speakers
Internet Explorer 8 or later
Toyota Information System (TIS) requires Adobe Flash Player 11 up and Java 7 up
Software License
Details on the professional diagnostics Techstream license here: and download directly from Toyota.

Reprogramming

It is possible to permanently damage a vehicle controller during the flash reprogramming process. It is especially important to understand that once started, the reprogramming process must not be interrupted, reprogramming devices must not be disconnected and PCs must not be allowed to go into Standby, hibernation or similar power management modes. The information provided herein is intended expressly for use by qualified professional automobile technicians. To prevent damage to your customer’s vehicle and ensure safe service practice, read these materials completely and thoroughly before servicing the vehicle and be sure to follow all instructions.
Some reprogramming operations require writing the VIN back into the module. Please refer to service information before beginning any reprogramming operation to determine this need and to download the necessary software tool.

Toyota Techstream V12.10.019 Download

Toyota Techstream v12.10.019 (05/2017)| Pass: topscantool.com | Size: 161MB

Techstream definitely works with the Microsoft Windows 10 (x64) operating system. Here are easy directions for newbies to install/setup Techstream on Windows 10 64 bit for VXDIAG VCX NANO Toyota.

Questions and answers… here you go.

Q: I am trying to download a version of Techstream to my Windows 10, 64 bit computer, so I may use my new VCX Nano to diagnose my car issue- won’t start after 6 weeks sitting dormant.

A: Techstream has been compatible with 64 bit OSes for a while, so I don’t think that is your problem.

However, the driver for VxDaig Nano (which is what I think you meant) is not a 64 bit driver, so you will need to go back the sellers of VxDaig and seek their support to load it on a 64-bit system.

The other option, find a cheap laptop on eBay or CL with Win 7 and follow the VxDaig Nano instructions and it will load right up.

Q: What version of Techstream is compatible with the 2nd gen? Will v12 work?

A: I had 12.xx.024 for a bit but it was minus several menus needed for better diagnostics:(.

The guy I share the Prolong setup with used the version 12 software on his 2007, so it’ll work on a Gen2 ;).

Reloaded 10.30.029 and it works well(y).

Q: Can you post the instructions or a good link for installation on win 10?

A: This link describes the installation process, possibly with link to the software.
http://blog.obdexpress.co.uk/2017/01/24/install-mini-vci-with-techstream-v10-on-64bit-computer/

I think the first requirement is that your mini VCI cable hardware is capable of 32 and 64 bit, I think some of the earlier cables may be 32-bit (XP) only. If capable of 64-bit, then they give you a small CD with some special files “XHorse” and it takes a little bravery to mess with your Registry etc.

Btw, Many people will not be able to follow the instructions to install the necessary cominents. No judgement here, it is just reality.

Which is why I up telling people to stick with using an XP laptop instead.

That would be great if you have an XP laptop (or desktop) available…it is definitely a much easier install. But going forward I presume that’ll be harder to find. I thought the Win10 instructions were a little confusing but I worked thru it.

Q: How to install Techstream v10 on Windows 64 bit?

A: Quick note on techstream 10.x with windows 7 or greater x64 with the 1.4.1 (and possibly the 2.0.1) Mini VCI cable. I was having absolute fits trying to get the driver recognized. Turns out the cable was being recognized as a Broadcom Bluetooth 3.0 Chip. If you select that device, Select Update driver, Select Let me Pick From a list of device drivers on my computer (letting windows scan a specific location doesnt work), then click have disk and browse to the location of your MCVI drivers (Should be C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS) and go to the ftdibus directory and select the ftdibus.inf file. This will get the correct drivers in place for the bus. The COM drivers will install automatically after you get the bus driver in place.

Hopefully the search engines pick this up and it is helpful for someone else.

Q: Tips needed for Windows 10.

A: anyone wanting to try this, use a laptop of computer (or virtual machine) that you have zero personal information on and you do not banking or commerce with.

#1 top attack vector (phishing, malware, spyware…etc) is from these kinds of unauthorized downloads.

Techstream is a paid-for item from Toyota. any pirated copies, wow rolling the dice there….

Download hotspot shield premium cracked apk. go ahead and use it but on a laptop that is disposable and you do zero personal or private work with

source: this is what I do for a living (everything and anything in the CISSP)

Q: Does anyone have answers and easy directions for computer dummies?

A: TIS Techstream V10 Setup Instruction ( !!! for 64 bit system !!! ) :

copy “Program Files (x86) “folder to drive C: , tick “replace all current items “

plug the Mini VCI cable into USB

Open the Device Manager and locate two failing devices in the list. Both will appear with yellow icon (usually under “Other”), indicating that Windows failed to install drivers for them. Now, right click each failing device, select Install Driver, then “Browse my Computer”and locate to “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”(enable the “include subfolders”flag). Click “Next”and wait until drivers are installed.

You should now see two new devices: “Universal Serial Bus ControllersUSB Serial Converte”and “Ports (COM & LPT)USB Serial Port (COMx)”.

Run the FirmwareUpdateTool.exe from the “C:Program Files (x86)XHorse ElectronicsMVCI Driver for TOYOTA TIS”. Click “Device Info”, You should see the “Device connected”screen.

Now install Techstream software using “Techstream_Setup_V10.10.018.exe” on our software CD

Software Registration: copy the two *.ini files in “Registration”folder to “C:Program Files (x86)Toyota DiagnosticsTechstreamEnv

* Attention: It’s C:Program Files (x86) not C:Program Files , BIG DIFFERENCE !!!

Registry Hack: Run the mvci-64bit.reg file to modify the registry for Techstream to recognize MINI-VCI under Windows x64

Run Techstream software. Go to Setup | VIM Select menu and select the “XHorse – MVCI”

Connect Mini VCI cable to your car’s OBDII interface, turn ignition on, then click “Connect to Vehicle”in Techstream. Wait. Then wait again. If everything works, you will be prompted to confirm car year/model after which you’ll get to the diagnostic interface.

* Important Note:

DO NOT change the “User Type”when you will run your TIS Techstream for 1st time! LEAVE IT with the Default option! “Official”Dealer/Repairer with other words…
in [ VIM Select ] option, please select the [ Xhorse – MVCI ], not [ TIS Techstream VIM ]
If you get the following reminder while using the program:

—————————————————————-

Network connection is unavailable. A network connection is required to use Techstream software.

You can only connect 29 more times without a network connection before software registration is required.

—————————————————————

Toyota Techstream 14 00 18 Keyboard

You can reset that as following steps:

Go to C:Program FilesToyota DiagnosticsTechstreamEnv and find “IT3usercustom.ini”file and look for “Connectioncount=1″or what ever number of times you tried and just delete “connectioncount=1”. Click save and you should be reseted back to 30